Description
Wago 2 way push cable connectors meet BS7671 regulations (773 series)
Features:
- The Wago 3 way push wire connector 773 series yellow simply pushing the stripped conductor into the connector makes the connection.
- The transparent housing provides a visible indication that the conductor is secure.
- There is a test point in the base of the housing.
- To remove the connector simply pull on the conductor whilst twisting the connector block left and right.
- The connector can then be reused.
- Wago connectors meet the most stringent UK and international standards including the electrical requirements of BS7671 17th edition.
- Installers can be totally confident that using Wago connectors enables them to follow ’best practice’ procedures and fully comply with the most up to date safety criteria.
- It ensures gastight and maintenance free connection.
- Pushwire connectors are used exclusively for solid and 7 stranded conductors ranging from 0.75-2.5mm².
- The design ensures that every conductor is clamped in a separate clamping unit along the current bar.
- The rating is 400V, 4KV, 24Amp.
- Quick and easy to use.
- Reliable and secure connections.
- Up to 50% reduced wiring time.
- Touch-proof connection.
- Vibration proof.
- Reusable.
- Integrated test points.
- Colour coded for easy identification.
- 17th edition IEE wiring regulations (BS7671)
- Wago connectors are IP20 (finger touch) with polyamide 6.6 housing for strength and durability.
Technical data:
- Colour – Yellow
- Amperage – 24Amp
- Ingress protection – IP20
- Max. service temp – 105°C
- Rating – 400V, 24Amp
- Brand – Wago
Applications:
- Lighting.
- Power.
- Heating and ventilation.
- Control circuits.
- Wire options are solid and stranded.
Operating Instructions:
- Simply strip the conductors 12mm, then push the conductor into the connector.
- The transparent housing provides a visible indication that the conductor is secure.
- The conductors can be removed by twisting and pulling the conductor at the same time
Standards & Certifications:
- Meets BS7671 17th edition.
- Approvals by IEC, UL, CSA.
Please note – In order to comply with the requirements BS7671 all connectors should be used in a suitable enclosure of material complying with the relevant glow-wire test requirements of BS 458-2.1. This will provide mechanical protection for the connectors as well as protection against dust, damp and accidental damage.
Reviews
There are no reviews yet.