Description
Features:
- Designed for recessing hinges in wooden doors & frames with a plunge router.
- Easy to use with minimal setting-up time, completing the job both accurately & quickly.
- Used on-site & in joinery shops to increase productivity with excellent results.
- Four apertures for fire door requirements.
- No. need for marking out in the conventional way.
- Quick & simple to set-up as the hinge is used as the pattern.
- Clean & accurate recesses are achieved every time.
- Suitable for timber based doors & square butt hinges.
- Can be used on both inside and outside doors.
- Use with a light duty plunge router with ¼” collet.
- Long reach router cutter required, 12mm diameter with 70mm overall length.
- Angled position slots to prevent creep.
- Unibase may be needed.
- T4EK router requires a Unibase or special guide bush (GB/T4/160).
Technical data:
- Weight – 2.9kg
- Jig Overall length – 1957mm
- Overall Length – 1957mm
- Brand – trend®
Hinge sizes possible:
- Length min. – 2.5/8″ (67mm)
- Length max. – 5″ (127mm)
- Width min. – 3/8″ (9.5mm)
- Width max. – 1.3/8″ (35mm)
Door sizes possible:
- Height min. – 6’ 5″ (1955mm)
- Height max. – 6’ 10″ (2100mm)
- Thickness min. – 5/8″ (16mm)
Supplied with:
- 4 x Apertures
- 2 x Bradawls with spacer
- 16mm Guide bush
- T-handle hex key
- 4mm Spacing gauge
- Plastic storage tube
Please note – For doors over 2040mm the bottom hinge will be higher than 9″ up.
Reviews
There are no reviews yet.