Stonecare4U – Grout Haze Cleaner (1L) – Suitable For Indoor And Outdoor, Resistant, Surfaces Such As Concrete, Porcelain etc

Description

Product details

Product information

Stonecare4U Grout Haze Cleaner effortlessly removes surface residues such as mortar and cement, builders dirt, efflorescence, encrusted and engrained dirt, rust as well as calcium & limescale deposits. Can be used as an indoor cleaner and an outdoor cleaner after the installation process or during construction

• Guarantee – 3 months
• Guarantee – 3 months

Features and benefits

Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e gloves, suitable protective eye-wear, face mask & clothing. NOTE: Following the instructions below, perform a small test application in an inconspicuous area on-site prior to use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements DO NOT PROCEED; contact us. Dependent on the degree of contamination, Grout Haze Cleaner can be used neat or diluted up to 1:10 with water. Pre-wet the surface, apply generously and allow the product to dwell for a few minutes before agitating and rinsing off with plenty of clean water. Repeat the process if necessary, if using the cleaner indoors ensure good ventilation during and after use. Important: Grout Haze Remover is not suitable for use with or around sensitive surfaces such as enamel, zinc, chrome, stainless steel, polished marble and limestone, etc.

• All surfaces must be resistant surfaces such as ceramic tiles, porcelain, brick, clay and quarry tiles, terracotta, concrete and other types of natural stones.
• Depending on contamination use Essential Grout Haze Cleaner neat or diluted up to 1:10 with water.
• Important: Grout Haze Remover is not suitable for use with or around sensitive surfaces such as enamel, zinc, chrome, stainless steel, polished marble and limestone, etc.