Description

EASYJoint PORCELAIN Patio Jointing Compound is a cutting-edge, dry-application jointing solution tailored for porcelain paving and suitable for other surfaces. This innovative compound sets quickly and forms a solid, non-permeable bond, offering unprecedented ease and cleanliness in patio installation. Perfect for both commercial and residential use, it requires no mixing and is activated with just a small amount of water.

Features:

Ready-to-use with no mixing required
Consistent color across all applications
Allows you to use only the amount needed, reducing waste
Clean and dust-free application process
No harmful additives, making it safe to use
Cures to form a hard, solid bond that’s non-permeable

Applications:

Ideal for porcelain paving but compatible with other types of paving
Suitable for exterior and some interior uses
Perfect for residential patios, walkways, and outdoor spaces
Strong enough for commercial projects such as courtyards and plazas
Effective on both large-scale and small-scale projects

Technical data:

Brand – Azpects
Range – EasyJoint
Product Type – Jointing Compound
Size – 15kg
Colour – White Gold

Standards & Certifications:

BS7533-101 compliant

Please note:

Porcelain paving must be secure and bonded to the bedding mortar.
The bedding mortar should be free-draining to allow water drainage.
The joint is non-permeable once set.
Air and surface temperatures should be above 10°C (50°F) for installation.
Allow the jointing sand to dry fully (24 to 48 hours) before exposure to rain.
Joint width should be between 3mm and 13mm, with a minimum depth of 19mm.
Hand tamping with a rubber mallet can be used if vibration compaction isn’t available.
Ensure adequate joint filling and avoid over-compaction.
Application water must drain to the sub-base to prevent moisture buildup.
Do not mix this product with other materials like cement or sand.
Avoid using in constantly wet areas.
Do not apply over asphalt or tarmac.
For natural stone, ensure the surface is completely dry to avoid staining.
Wait seven days after installation before cleaning or sealing the surface.
Avoid high-pressure cleaning for the first 30 days after installation.