Metal GreenCoat® Pural Coated Slate Grey Barge Flashing 200mm x 200mm x 3000mm

Description

Roof edge flashing barges, sometimes known as Verges, are used at the end of a run of sheets to trim and seal off the edge of the roof. All metal cladding flashings are a vital part of any profiled clad roof, they not only help to weatherproof the building but also add to it aesthetically too. The 200 x 200 flashings give a coverage of 192 x 192 due to the 8mm welt.
Steel Roof flashing barges are available in a range of finishes and colours to match or contrast our roofing sheets depending on the look you are after. Steel Roof flashing barges are available in a either graphite grey or copper brown colour. They are secured by stitching them (using st22 stitching screws) to the roofing sheet below. You will need to allow an overlap of a minimum 100mm when fitting barges end on end.

We can fold most flashing shapes to customers’ requirements in 3-metre lengths at short notice. Please note:The 200 x 200 flashings give a coverage of 192 x 192 due to the 8mm welt.